shutdown /m \\
shutdown /m \\
shutdown \\
shutdown \\
All three of the following commands display the system uptime
psinfo \\
srvinfo \\
systeminfo /s
runas /user:administrator@rallencorp.com /netonly "mmc.exe" - Sometimes it is convenient to create a MMC console that runs under administrator privileges. In this case, simply use mmc.exe as the command to run from runas:
netsh int ip show config - view network configuration information is netsh
netsh int ip set address name="Local Area Connection" source=static 10.3.53.3 255.255.255.0 10.3.53.1 1 - This example configures a static IP address for "Local Area Connection":
netsh int ip show dns - view the current DNS configuration for all connections on the local machine
nltest /server:
linkspeed /s \\
linkspeed /s
linkspeed /dc - Alternatively, you can specify the /dc switch to have it test the machine's current domain controller
netsh interface ipv6 install - The following command installs the IPv6 stack. It must be run directly on the target server
psexec \\server01 netsh interface ipv6 install - If you need to run the command remotely, you can use the psexec
secedit /refreshpolicy machine_policy - You can force new auditing settings to be applied by running the secedit command on Windows 2000
gpupdate /target:computer - the gpupdate command on Windows Server 2003
cusrmgr -m \\
For example:
cusrmgr -m \\srv01 -u admininstrator -r admn
iisreset - The following command restarts all IIS services on the computer
iisreset 172.16.12.5 /stop - To stop IIS services on a remote computer with IP address 172.16.12.5
iisreset 172.16.12.5 /status - To verify that IIS services have been stopped on the remote computer
iisreset /disable - To prevent iisreset from being used to stop IIS services,
iisreset /stop - stop all IIS services
net stop w3svc - To stop the WWW service only on your IIS computer
net start w3svc - To start it again
net stop /y iisadmin - To stop the IISAdmin service and all dependent IIS services
iisweb /stop "Default Web Site" - To stop the Default Web Site only while leaving other web sites running
iisweb /start "Default Web Site" - To start it again
iisweb /create D:\HR "Human Resources" /i 216.44.65.8 - The following command creates a new web site named Human Resources on server with IP 216.44.65.8 and root directory D:\HR
iisweb /create D:\Corp "My Company" - The following command creates a new site named My Company with root directory D:\Corp and IP address "All Unassigned,"
iisvdir /create "Human Resources" employees D:\resumes - The following command creates a virtual directory within the Human Resources web site and maps alias employees to physical directory D:\resumes:
iisvdir /query "Human Resources" - list virtual directories within the Human Resources site:
iisvdir /delete "Human Resources\employees" - To delete the previously created virtual directory
iisback /backup /b 28july04 - The following command backs up the metabase using the iisback.vbs script and names the two backup files 28july04.MD0
iisback /list - To view a list of the current metabase backups
iisapp - The following command displays the process ID (PID) of all worker processes running on the computer,
iisapp /p 2765 - The following command displays the application pool to which the worker process having PID 2765 is assigned
iisftp /create C:\ftpstuff "My FTP Site" /i 172.16.12.50 /dontstart - The following command creates a new FTP site named My FTP Site with root directory C:\ftpstuff and IP address 172.16.12.50
iisftp /start "My FTP Site" - To start the new site,
iisftp /query - To display a list of all FTP sites on your server
net stop msftpsvc - You can also stop and start all FTP sites on your server using the following commands
net start msftpsvc
net stop dns - You can use the net.exe command to stop or start the DNS Server service on the local machine
net start dns
dnscmd
dnscmd
dnscmd
unlock . * -view - unlock that lets you find locked out users and unlock them in one shot
unlock dc01 username - The following command unlocks the user rallen on dc01
dsmod user
dsmod user
dsmod group "
dsmod group "
dsmod user
dsget group "
dsget group "
dsadd computer "
netsh int ip set address name="
netsh int ip set address name="Local Area Connection" source=dhcp - configuring the connection named "Local Area Connection" to use DHCP
netsh int ip set address name="Local Area Connection" source=static 10.3.53.3 255.255.255.0 10.3.53.1 1 - This example configures a static IP address for "Local Area Connection
Run any of the following commands to start a service
psservice start
sc start
wmic service
net start
Run any of the following commands to stop a service
psservice stop
sc stop
wmic service
net stop
sc
sc \\
sc \\
psservice \\
taskkill -pid
taskkill /s
pskill \\
tasklist - viewing the running processes via the command line
pslist \\
top - There is also the top.exe command, which is available in the Windows 2000 Resource Kit. It provides a continually updated view of the top running process (by CPU)
tlist | findstr cmd.exe - On Windows 2000, you can use the tlist.exe (or pslist.exe) command in combination with findstr.exe to find processes
runas /user:
runas /user:AMER\rallen.adm "mmc.exe" -
diskpart - On Windows Server 2003, you can use the diskpart utility to view the disk, drive, and volume configuration. First, get into interactive mode
list disk - to view the list of disks
list vol - to see the list of volume and assigned drive letters,
nltest /server:
nltest /server:
Usefull Command-line Guide in Wink2 & Wink23 Server
change recycle bin name
change recycle bin name
1. Start, Run, 'Regedit'.
2. Press 'Ctrl'+'F' to open find box and type 'Recycle Bin' to search.
3. Change any value data with 'Recycle Bin' to whatever name you want to give it ( ie, like 'Trash Can' or 'Dump' etc).
4. Press F3 to continue searching for 'Recycle Bin' and change wherever you come across 'Recycle Bin' to new its new name.
5. Repeat step 4 until you have finished with searching and changed all values to its new name.
6. Close regedit and hit F5 on desktop to see the new name on screen.
Note: As a good practice, always backup your registry before changing anything although changing 'Recycle Bin' name is a simple tweak and doesnt affect anything else
Make your computer dual-boot Vista and XP
Step 1. In Vista, click Start, type diskmgmt.msc, and press Enter. Click Continue if prompted by User Account Control.
Step 2. Right-click a drive and choose Shrink Volume. Specify the amount to shrink, which in this case is the amount you want for your XP partition. At a minimum, you'll need around 2.5GB for XP Pro SP2. I suggest you select a larger partition to leave room for updates and other files that may need to be on the same drive as XP. Because I wanted a 5GB partition, I typed 5000 (representing 5,000 megabytes) in the available box. Click Shrink.
Step 3. Right-click the newly available area and choose New Simple Volume. Follow the steps in the wizard to assign a drive letter now, or wait until the next step. When prompted, check Perform a quick format to format the volume with NTFS.
Step 4. When the wizard is done formatting the new volume, you can assign or rearrange drive letters as needed. For example, changing drive letters may also put your CD/DVD drive in a more logical order.
To do that, right-click a volume or the CD/DVD drive and choose Change Drive Letters and Paths. If a volume hasn't got a drive letter yet, click Add. Otherwise, select the drive icon in the dialog box and click Change.
If you're rearranging the letters on existing drives, you may need to change the drives in a particular order. Or you may need to give a drive a temporary letter (such as Z) to free up a letter for another drive; you would change the Z drive to something else later. Make your selection and click OK. Repeat for other partitions or drives until you have the order you want.
Step 5. When you're done with your partitioning chores, exit Disk Management. Insert your XP disc into the drive and restart your system, booting from that disk.
Step 6. Follow the steps to install XP. When asked for the target drive, select your new partition and press Enter. Because you already formatted this partition with NTFS, you can skip the formatting step. At the appropriate screen, arrow down to Leave the current file system intact (no changes) and press Enter. Continue the installation process until it's finished and XP has started.
Step 7. Your system now boots to XP, so we'll need to do some fixing to set up a boot menu. Insert your Vista DVD and restart the computer from it. Click Next in the first screen.
Step 8. Don't click Install when prompted! Instead, click Repair Your Computer in the lower-left corner.
Step 9. When the System Recovery Options dialog appears, make sure Microsoft Windows Vista is selected and click Next. In the next dialog box, select the Command Prompt option at the bottom.
Step 10. In the command-prompt window, type the following commands and press Enter after each one:
bootrec.exe /fixMBR
bootrec.exe /fixBoot
Step 11. Close the command prompt and click Restart.
Step 12. When your computer has booted into Vista, click Start, type cmd.exe, and press Ctrl+Shift+Enter to make the command window open with elevated privileges. Click Continue, if prompted by User Account Control.
Step 13. Type the following commands in the command window, one at at time, pressing Enter after each one. After each command, you should get the response, "The operation completed successfully." A response of, "The specified entry already exists," is OK, too. If not, retype your command to make sure you've entered it correctly. If Vista is installed on a drive other than c:, change the first command below to use the proper drive letter. The curly braces around {ntldr} in each command must be typed exactly as shown:
bcdedit -set {ntldr} device partition=C:
bcdedit -set {ntldr} path \ntldr
bcdedit -displayorder {ntldr} -addlast
bcdedit -set {ntldr} description "Microsoft Windows XP"
That's it! The next time you restart your system, you should be see a prompt that will let you choose between Vista or XP. Select the one you want and press Enter.
Learn CCNA in 5 days
he Cisco CCNA network associate certification validates the ability to install, configure, operate, and troubleshoot medium-size routed and switched networks, including implementation and verification of connections to remote sites in a WAN. This new curriculum includes basic mitigation of security threats, introduction to wireless networking concepts and terminology, and performance-based skills. This new curriculum also includes (but is not limited to) the use of these protocols: IP, Enhanced Interior Gateway Routing Protocol (EIGRP), Serial Line Interface Protocol Frame Relay, Routing Information Protocol Version 2 (RIPv2),VLANs, Ethernet, access control lists (ACLs)
Download link
http://rapidshare.com/files/127259508/CCNA-Day1_Slides.rar
http://rapidshare.com/files/127259936/CCNA-Day2_slides.rar
http://rapidshare.com/files/127259816/CCNA-Day3_slides.rar
http://rapidshare.com/files/127260263/CCNA-Day4_slides.rar
http://rapidshare.com/files/127260170/CCNA-Day5_slides.rar
Royal Windows Vista Business SP1 x86 DVD ISO | 4.3 GB
In normal Vista Business Dreamscenes are not available but enjoy Royal Business with fully activated Dreamscene packs. It will be more comfortable, faster and reliable when compared to other 32-Bit vista Business operating systems.
New hot fixes, updates and the Vista SP1 package are integrated.
* New Windows Sounds
* New Codings and scripts for high performance
* New ORB image
* UAC Disabled
* Enabled AntiSpyware Realtime Protection
* Show extensions for known file types
* Enabled IE Phishing Filter
* New Default Theme
* It supports more than 4 GB RAM
* Extra 3'rd Party themes
http://netfolder.in/folder.php?folder_id=MTU1MDQ
Windows XP Live USB Edition...
55 MB / unpack = 154 MB | English | Bootable from USB |
Windows XP Live USB Edition... Boot Windows XP Straight From Your USB!!!!
-Basically what the title says...
-Windows XP that boots off of your usb drive (256 or higher)
-Readme inside rar
Links (52 Mb)
Windows XP Pro SP3 DECEMBER 2008 (CD/ISO) | RS Link 730MB
Windows XP Pro SP3 DECEMBER 2008 (CD/ISO) | RS Link 730MB
This is Windows XP Professional SP3 which includes all critical updates through November 2008.
It does not requires any cracks or tools to pass the validation.
This is an untouched version of Windows XP Professional SP3
- Extract .rar files to .iso using Winrar
- Proceed to burn this .iso file to a blank CD using PowerISO, UltraISO, Alcohol 120% at medium speed.
-Then You have a Bootable CD.
-Install fresh copy of Windows XP by formatting your hard drive C:.
-Use and enjoy a lifetime genuine Windows XP SP3
CD image include:
- Bootable ISO file
- Unattended setup
- Pre-Activated, so you don't need any WGA Activation Tool.
- CD-KEY (original Volume License Key) is integrated so you don't have to enter anything. SO YOU CAN USE AUTOMATIC UPDATES!
After install you have 25 Updates including IE 7: (Total: 25 updates , 41.1 MB , 10 minutes)
Security Update for Windows XP (KB955069)
Security Update for Windows XP (KB954459)
Windows Malicious Software Removal Tool - November 2008 (KB890830)
Security Update for Windows XP (KB957097)
Security Update for Windows XP (KB958644)
Security Update for Windows XP (KB954211)
Cumulative Security Update for ActiveX Killbits for Windows XP (KB956391)
Security Update for Windows XP (KB956803)
Security Update for Windows XP (KB956841)
Security Update for Windows XP (KB957095)
Cumulative Security Update for Internet Explorer 6 for Windows XP (KB956390)
Windows Genuine Advantage Notification (KB905474)
Security Update for Windows XP (KB938464)
Security Update for Outlook Express for Windows XP (KB951066)
Security Update for Windows XP (KB946648)
Security Update for Windows XP (KB952954)
Security Update for Windows XP (KB950974)
Update for Windows XP (KB951072)
Update for Windows XP (KB952287)
Update for Windows XP (KB951978)
Security Update for Windows XP (KB951698)
Security Update for Windows XP (KB951376)
Security Update for Windows XP (KB950762)
Security Update for Flash Player (KB923789)
Windows Internet Explorer 7 for Windows XP
SATA1 / SATA2 hard drivers works like a charm
Download :
http://anonymz.com/?http://rapidshare.com/files/171373042/Windows_XP_Pro_SP3_DECEMBER_2008_www.softarchive.net.part1.rar.html
http://anonymz.com/?http://rapidshare.com/files/171372779/Windows_XP_Pro_SP3_DECEMBER_2008_www.softarchive.net.part2.rar.html
http://anonymz.com/?http://rapidshare.com/files/171372878/Windows_XP_Pro_SP3_DECEMBER_2008_www.softarchive.net.part3.rar.html
http://anonymz.com/?http://rapidshare.com/files/171371511/Windows_XP_Pro_SP3_DECEMBER_2008_www.softarchive.net.part4.rar.html
Windows XP Professional SP3 - 541,62 MB
This Windows XP SP3 is untouched, needs ser!@l which is included in rar and fully legit.
How to install:
1. Extract RAR files with Winrar.
2. Burn ISO onto CD with software such as Nero, try to burn as slow as possible.
3. Ready to install? Put the disc into your drive and reboot.
3. Get into Bios and set boot from CD
4. Follow install instructions (very easy)
5. Enjoy your XP
Download: (Size: 541,62 MB)
http://rapidshare.com/files/172256774/WinXp3_www.softarchive.net.part1.rar
http://rapidshare.com/files/172256803/WinXp3_www.softarchive.net.part2.rar
http://rapidshare.com/files/172256773/WinXp3_www.softarchive.net.part3.rar
http://rapidshare.com/files/172256835/WinXp3_www.softarchive.net.part4.rar
http://rapidshare.com/files/172256833/WinXp3_www.softarchive.net.part5.rar
http://rapidshare.com/files/172256580/WinXp3_www.softarchive.net.part6.rar
Ghost version of Windows Xp-Vista Style version 3.0 Service Pack 3
Power of the Blue
Support All Motherboard - All HDD Mode (IDE - AHCI)
Ghost
This is the Ghost version of Windows Xp-Vista Style version 3.0 Service Pack 3, This Ghost's included the fresh installed of window. This Ghost verion can be unpack on All Motherboard and All Mode of the Hard disk (IDE Mode - Standard PATA HDD and AHCI Mode - SATA HDD)
Included:
* Hiren's BootCD 9.2 - All in one DOS tools
* A fresh installed of Windows Xp-Vista Style ver 3.0 - Power of the Blue
* Themes for Windows (Over 50 themes)
* RocketDock
* Font Vietnamese
* Unikey4
* Vietkey2000
* Support all motherboard
* Support all HDD mode[/]
1. Download the DVD ISO, burn it into a DVD and restart computer in DOS mode and Setup Windows by Ghost.
http://anonymz.com/?http://rapidshare.com/files/173815638/S3.part01_www.softarchive.net.rar
http://anonymz.com/?http://rapidshare.com/files/173815685/S3.part02_www.softarchive.net.rar
http://anonymz.com/?http://rapidshare.com/files/173815530/S3.part03_www.softarchive.net.rar
http://anonymz.com/?http://rapidshare.com/files/173817308/S3.part04_www.softarchive.net.rar
http://anonymz.com/?http://rapidshare.com/files/173817376/S3.part05_www.softarchive.net.rar
http://anonymz.com/?http://rapidshare.com/files/173817310/S3.part06_www.softarchive.net.rar
http://anonymz.com/?http://rapidshare.com/files/173817307/S3.part07_www.softarchive.net.rar
http://anonymz.com/?http://rapidshare.com/files/173817317/S3.part08_www.softarchive.net.rar
http://anonymz.com/?http://rapidshare.com/files/173820464/S3.part09_20_www.softarchive.net.rar
http://anonymz.com/?http://rapidshare.com/files/173815569/S3.part10_www.softarchive.net.rar
Note: Your must installed on partition C (Partition 1 on Disk 0)
Use this key to reg after installed: DHXQ2 - WRGCD - WGYJY - HHYDH - KKX9B[/b]
list of Linux troubleshooting sites
list of Linux troubleshooting sites for linux newbie or linux pemula (read: indonesian language for newbie), Hopefully these lists will be useful for you and me,surely. Here they are, let's check them out one by one or just skip them if you don't want to. Well Let's get the ball rolling, pal.
1. PC Quest
2. The Linux gurus
3. RedHat
4. Linux Tips
5. Souptonuts
6 Linux Newbie (Pemula)
7. Bruno Linux
8. Linux Newbie Guide
9. Just Linux
10. Unix Guide.net
11. Patoche
12. Pemula Linux.or.id
13. Osdir.com
14. Linux Sorsawo
15. Linux4All
16. Sekolah Linux.com
Incresing a swap space on Linux OS
This is simple method for Increase your available swap space with a swap file
All of your devices function, and everything is configured just the way you like it. At least you think so, until you start running out of memory when you have Open Office.org and lots of browser tabs open simultaneously. You realize you should have specified a larger swap partition during your install. this simple method of installing gain .swap partition.
There’s more than one way to maintain your Linux system. Instead of creating a swap file, you could instead resize and or reshuffle your partitions with parted or its graphical front end QtParted.
To start , see how much swap space you already have. At a command line by typing ,
swapon -s (you might need to prepend /sbin/ if you’re not root)
the command should produce a message :
Filename Type Size Used Priority
/dev/hda2 partition 128044 92472 -1
The numbers under “Size” and “Used” are in kilobytes.
Let’s figure out where to put it. Running df -m from a command line should produce output something like this:
Filesystem 1M-blocks Used Available Use% Mounted on
/dev/hda1 11443 6191 5252 55% /
The -m switch we used provided us with output in megabytes. Under the “Available” column we have approximately 5GB of free space on our root partition. Let’s steal 512MB of that for our auxiliary swap file. You might want more or less, depending on your memory needs, how much swap space you already have available, and how much free disk space you have. The general rule of thumb for swap size is that your total available swap space should be around double your RAM size. If you have additional partitions, and one of those is a better candidate than the / partition, feel free to use it instead.
Please make Back up your important data before proceeding. If you carefully follow the steps below you should be fine,
In order to create our supplementary swap file, we’re going to use the dd (data dump) command. You’ll need to become root to perform the next few steps. su - and enter your root password. When you’re ready,
dd if=/dev/zero of=/extraswap bs=1M count=512
replacing 512 with the number of megabytes you want in your auxiliary swap file. if= and of= are short for infile and outfile. The /dev/zero device file will give us zeroes to be written to the output file. If you want this file on a different partition, say your /var partition, you would replace /extraswap with /var/extraswap.
Now we have a file the size we want on disk, and we can prepare it for use as a swap partition. We’ll use the mkswap command to make our file swap-consumable for the Linux kernel. Again as root,
#mkswap /extraswap
To turn on our swap file, we run swapon /extraswap. Now when we run swapon -s we should see our existing swap partition and our new swapfile. Also, the free command should show an increase in total swap space.
But we’re still not done yet. If we reboot our machine now, our new swapfile won’t be active, and we’ll have to run swapon /extraswap again. to make things more permanent, you need to edit our /etc/fstab file.
make a copy of the file. Something like this should do the trick:
cp /etc/fstab /etc/fstab.mybackup
open /etc/fstab in your favorite text editor and find a line about your swapfile that looks something like this:
/dev/hda2 none swap sw 0 0
You’ll need another line like that underneath it pointing to your new swap file. Replace the first column with the location of your new swap file. For our example, the new line should look like this:
/extraswap none swap sw 0 0
Save the file. Mistaken changes to /etc/fstab could render your system unbootable, so just to make sure you didn’t accidently change anything else in /etc/fstab, run diff /etc/fstab.mybackup /etc/fstab to check for differences. That should output only the single line you added, with a “>” sign in front of it. If you see anything else in diff’s output, edit /etc/fstab again, fix it, and run the above diff command again.
In practical terms, there’s a minimal performance hit from this extra step. By the time you’ve run out of RAM and are beginning to swap, you’re already suffering a massive performance hit. After your original swap partition is full and you’re spilling into your auxiliary swap file, your system should be suffering badly enough that the added performance hit will be completely imperceptible.
In order to avoid this sort of problem entirely with your next install, using Linux’s Logical Volume Manger is probably a good idea, and there are other Linux memory management techniques. Of course the ideal solution is to just install additional RAM.
Creating CD-ROM ISO image in Linux
dd is a perfect tool for copy a file, converting and formatting according to the operands. It can create exact CD-ROM ISO image.
This is useful for making backup as well as for hard drive installations require a working the use of ISO images.
How do I use dd command to create an ISO image?
Put CD into CDROM
Do not mount CD. Verify if cd is mounted or not with mount command:
# mount
If cd was mouted automatically unmout it with umount command:
# umount /dev/cdrom
OR
# umount /mnt/cdrom
Create CD-ROM ISO image with dd command:
# dd if=/dev/cdrom of=/tmp/cdimg1.iso
Where,
* if=/dev/cdrom: Read from /dev/cdrom (raw format)
* of=/tmp/cdimg1.iso: write to FILE cdimg1.iso i.e. create an ISO image
Now you can use cdimg1.iso for hard disk installation or as a backup copy of cd. Please note that dd command is standard UNIX command and you should able to create backup/iso image under any UNIX like operating system.
How to remove new folder exe or regsvr exe or autorun inf virus
Manual Process of removal
So let’s start the process off reclaiming the turf that virus took over from us.
- Cut The Supply Line
- Search for autorun.inf file. It is a read only file so you will have to change it to normal by right clicking the file , selecting the properties and un-check the read only option
- Open the file in notepad and delete everything and save the file.
- Now change the file status back to read only mode so that the virus could not get access again.
- Click start->run and type msconfig and click ok
- Go to startup tab look for regsvr and uncheck the option click OK.
- Click on Exit without Restart, cause there are still few things we need to do before we can restart the PC.
- Now go to control panel -> scheduled tasks, and delete the At1 task listed their.
- Open The Gates Of Castle
- Click on start -> run and type gpedit.msc and click Ok.
- If you are Windows XP Home Edition user you might not have gpedit.msc in that case download and install it from Windows XP Home Edition: gpedit.msc and then follow these steps.
- Go to users configuration->Administrative templates->system
- Find “prevent access to registry editing tools” and change the option to disable.
- Once you do this you have registry access back.
- Launch The Attack At Heart Of Castle
- Click on start->run and type regedit and click ok
- Go to edit->find and start the search for regsvr.exe,
- Delete all the occurrence of regsvr.exe; remember to take a backup before deleting. KEEP IN MIND regsvr32.exe is not to be deleted. Delete regsvr.exe occurrences only.
- At one ore two places you will find it after explorer.exe in theses cases only delete the regsvr.exe part and not the whole part. E.g. Shell = “Explorer.exe regsvr.exe” the just delete the regsvr.exe and leave the explorer.exe
- Seek And Destroy the enemy soldiers, no one should be left behind
- Click on start->search->for files and folders.
- Their click all files and folders
- Type “*.exe” as filename to search for
- Click on ‘when was it modified ‘ option and select the specify date option
- Type from date as 1/31/2008 and also type To date as 1/31/2008
- Now hit search and wait for all the exe’s to show up.
- Once search is over select all the exe files and shift+delete the files, caution must be taken so that you don’t delete the legitimate exe file that you have installed on 31st January.
- Also selecting lot of files together might make your computer unresponsive so delete them in small bunches.
- Also find and delete regsvr.exe, svchost .exe( notice an extra space between the svchost and .exe)
- Time For Celebrations
- Now do a cold reboot (ie press the reboot button instead) and you are done.
I hope this information helps you win your own battle against this virus. Soon all antivirus programs will be able to automatically detect and clean this virus. Also i hope Avast finds a way to solve this issues.
As a side note i have found a little back dog( winpatrol ) that used to work perfectly on my old system. It was not their in my new PC, I have installed it again , as I want to stay ahead by forever closing the supply line of these virus. You can download it form Winpatrol website.
PREVENT PEN-DRIVE VIRUSES
Every system has invariably experienced the brunt of the viruses.With devices like Thumb/pen drives becoming popular,viruses are on rage.The more serious ones require good antivirus software and they will be detected and healed.The smaller ones such as orkut virus , sss.exe , ctfmon.exe are not recognized but still pester .Most of the viruses can be avoided as follows
Steps :
1) Goto Run ( Click start , click run )
2) Type gpedit.msc press enter
3) Expand User Configuration option located at your left
4) Click on System
5) Find an option at your right which says TURN OFF AUTOPLAY .Double click it.
6) Enable it and Turn Off Auto Display to All Drives
7) If group edit has already been disabled it means you dont have permission to modify it as you are not the administrator or you have already been affected with a virus .
Best Trick to Make Windows XP Genuine
Change your product key
This will allow you to bypass the Microsoft Genuine Validation Thing WINXP:
This method works better than many others i have tried before. Forget the cracks and injectors etc... this is the BEST WAY:
1) start > run > "regedit" (without the quotes of course)
2) go to the key:
HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\Windows
NT\CurrentVersion\WPAEvents\OOBETimer
...and doubleclick on it. Then change some of the value data to ANYTHING ELSE...delete some, add some letters, I don't care...just change it!
now close out regedit.
3) go to start > run >
"%systemroot%\system32\oobe\msoobe.exe /a"
(again, dont type the quotes)
4) the activation screen will come up, click on register over telephone, then click on CHANGE PRODUCT KEY,
enter any of these keys.
JG28K-H9Q7X-BH6W4-3PDCQ-6XBFJ.
HJY8X-RJDXW-KF7MH-MXDGQ-RG2J8
Q6TD9-9FMQ3-FRVF4-VPF7Y-38JV3
Now you can do all the updates without activating, and the Genuine Microsoft Validation Thing won't bug you no more!!
TURN ON UR PC IN JUST 10 SECONDS
TURN ON UR PC IN JUST 10 SECONDS
u wanna know how to turn the pc on in 10 seconds (may vary)Aight heres what u have to do to turn ur pc on in 10 seconds
Aite Click on the start button then press R it will take u to Run well go to run
n type Regedit
press enter
this will open Registery Editor
now look for the key
HKEY_LOACAL_MECHINE\SYSTEM\CurrentControlSet\Control\ContentIndex
now there find the Key Called
"Startup Delay"
Double Click On It
Now where its Base
Click Decimal
Now its Default Value Is 4800000 (75300:hexadecimal)
Change The Value To 40000
here u go u have done it
now close the Registery Editor and Restart Your Computer
Test UR Anti-virus
To test if your antivirus is in good shape you should do as in continuing:
Open Notepad and copy this text:
X5O!P%@AP[4\PZX54(P^)7CC)7}$EICAR-STANDARD-ANTIVIRUS-TEST-FILE!$H+H*
the text should be in one horizontal line
Then save file as "eicar.com" including quotation-marks
After some seconds saving this file your antivirus should come with the message that this file is infected virus asking permision for its deletetion/clean.
This file is secure and its not gonna infect your computer in whatever way.It is a standart text developed by the European Institute for Computer Anti-virus Research (EICAR).Every antivirus is programed to load this file as a virus.
If your antivirus is not going to hack this file as a virus ,in your screen will appear DOS window with this text EICAR-STANDARD-ANTIVIRUS-TEST-FILE".If this happens then you should probably find some other Antivirus up to date,meaning your PC might
already being infected from viruses and your curent antivirus do not recognize them
Three things that even Microsoft can't explain!
An Indian found that nobody can create a FOLDER anywhere on the Computer which can be named as "CON". This is something funny and inexplicable… At Microsoft the whole Team, couldn't answer why this happened!
TRY IT NOW, IT WILL NOT CREATE A "CON" FOLDER
MAGIC #2
For those of you using Windows, do the following:
1.) Open an empty notepad file
2.) Type "Bush hid the facts" (without the quotes)
3.) Save it as whatever you want.
4.) Close it, and re-open it.
Noticed the weird bug? No one can explain!
MAGIC #3
Again this is something funny and can't be explained… At Microsoft the whole Team, including Bill Gates, couldn't answer why this happened!
It was discovered by a Brazilian. Try it out yourself…
Open Microsoft Word and type
=rand (200, 99)
And then press ENTER
And see the magic…..!
